CYY-9000 full spectrum direct reading spectrometer adopts the international standard design and manufacturing technology, adopts the full digital technology, replaces the huge PMT simulation technology, synchronizes with the international spectrometer technology, adopts the vacuum optical chamber design and full digital excitation light source, leading CCD detector, high-speed data readout system, so that the instrument has extremely high performance and low cost Detection line, long-term stability and repeatability. It is used in iron and steel casting, metal manufacturing, mechanical processing, metal smelting, shipbuilding, automobile and aerospace, material quality control, material brand identification, material research, development and production.
Detection Matrices:
Iron(Fe) and its alloys (Steel alloy, Cast iron, Fe-Low alloy, Fe-Cr steel, Fe-Cast iron, Fe-Cr-cast, Fe-Mn steel, Fe-Tool steel etc.)
Aluminium(Al) and its alloys (Al-Si alloy, Al-Zn alloy, Al-Cu alloy, Al-Mg alloy, Pure-Al alloy etc)
Copper(Cu) and its alloys (Brass, Copper-Nickel-Zn, Aluminum Bronze, Tin-lead Bronze, Red Copper, Be-Bronze, Si-Bronze etc)
Nickel(Ni) and its alloys (Pure Ni, Monel metal, Hadtelloy Alloy, Incoloy, Inconel, Nimonic etc)
Cobalt(Co) and its alloys (Co-orientation, Low Co alloy, Stellite 6,25,31, Stellite 8,WI 52, Stellite 188, F)
Magnesium(Mg) and its alloys (Pure Mg, Mg/Al/Mn/Zn-alloys)
Titanium(Ti) and its alloys
Zinc(Zn) and its alloys
Lead(Pb) and its alloys
Tin(Sn) and its alloys
Argentum(Ag) and its alloys
Small sample, special size sample and wire detection
| Project |
Index |
| Testing matrix |
Fe, Al, Cu, Ni, Zn, Mg, etc
Iron base, aluminum base, copper base, nickel base, zinc base, magnesium base, etc |
| Test time |
It depends on the type of sample, generally about 25s |
| Optical system |
A full spectrum vacuum optical system based on Paar rungellan circle |
| Wavelength range |
130~800nm |
| Focal length (circle radius) |
400mm |
| Detector (sensor) |
High performance CCD array |
| Electrode |
Tungsten spray electrode |
| Analysis gap |
Analysis gap of sample table: 3.4mm |
| Working temperature |
(10~35)ºC |
| Storage temperature |
(0~45)ºC |
| Working humidity |
20%~80% |
| Purity and quality requirements of argon |
999%, air pressure ≥ 4MPa |
| Argon inlet pressure |
0.5MPa |
| Argon flow rate |
The excitation flow rate is about 3.5l/min and the maintenance flow rate is about 0.4l/min |
| Excitation maximum power |
400W |
| Type of light source |
New adjustable digital light source, high energy pre ignition technology (HepS) |
| Discharge frequency |
100-1000 Hz |
| Aperture of exciter |
13mm |
| Vacuum system |
Automatic control and monitoring of vacuum software |
| Working power supply |
220V AC, 50/60 Hz, single phase power supply with protective grounding |
| Instrument size |
850*700*500mm |
| Instrument weight |
More than 90kg (table type, without vacuum system);More than 120kg (vertical) |
About spectrometer order procedure
1.Please company or factory and related personnel Determine the material of the product to be tested and the relevant instruments required.
2.We'll quantity through e-mail or WeChatNegotiate all details about this order.
3.Negotiated payment as advanced payment reached, Tell consignee information, Calibrate the target material into the instrument again, and prepare the standard sample and accessories according to the material and requirements selected by the customer .
4.Ship out goods as the balance payment received,Send out documents that customers required.
5.Customers signed the good, and engineer fly there to installation Train 1-2 operators.
6.Warranty 1 year after installation,Daily use details or questions can also be answered by network remote transmission.
7.After-sale department call back to survey the customers' satisfication ,Communicate on a regular basis.
Installation Instructions
About training
After the instrument arrives at the port, please load and unload it in time and transport it to the laboratory prepared by the factory (or unit) in advance. Then check whether the outer package is damaged or not, as well as the condition of the internal instrument products. After checking the list, our company will assign the installation engineer to go on a business trip to the local area to carry out on-site installation and commissioning, and train 1-2 personnel suitable for operation. The training time is usually completed within 3-4 days of arrival. Through training, the relevant personnel master the use of spectral analysis, skilled instrument operation and maintenance. Later in the process of use, if you have technical questions, you can also communicate in time through remote network chat tools, and communication is convenient. The overall analysis process of the instrument is automatic, learning to use is relatively simple, as long as the operator is careful, will normally use the computer, there is a certain degree of education can be mastered.
ChangYouYi experimental analysis instrument is made in China
Nanjing Changyouyi Analytical Instrument Co., Ltd. is a famous research and development manufacturer of analytical instruments, a contract and trustworthy enterprise. The company integrates R&D, production, sales, training, maintenance, and technical consultation, and has gathered a group of high-tech senior professionals who have been engaged in analytical instruments for a long time. Incorporating domestic and foreign microcomputer and sensor technology, infrared technology and optics, machinery, inspection and other technologies, starting from the actual needs of customers, research and development of a series of high-speed analysis instruments and supporting testing equipment, such as: carbon silicon analyzer in front of furnace , Melting thermometer in front of furnace, infrared carbon and sulfur analyzer, multi-element analyzer, spectrum analyzer, metallographic analyzer, five element analyzer, copper alloy & aluminum alloy analyzer, ore analyzer,Portable hardness tester, bench hardness tester, ultrasonic flaw detector, universal experimental tension machine, coating thickness tester, high-precision electronic balance and other laboratory testing equipment.
Instrument design and application industry:
The design of the instrument is novel and reasonable, and the technical level is advanced. It is an ideal and widely used laboratory, analysis and testing equipment. It is suitable for industrial and mining enterprises such as steel rolling, metallurgy, casting, machinery, railways, quality and technical supervision bureaus, construction quality inspection institutes, colleges and universities, scientific research institutes.
Used to analyze metal elements (carbon, sulfur, silicon, manganese, phosphorus, copper, nickel, chromium, molybdenum, rare earth, magnesium, titanium, zinc, lead, aluminum, iron and other element content).
Used to analyze the carbon and silicon content of the molten iron in front of the furnace and measure the temperature of the molten iron in front of the furnace.
Used for physical analysis and testing of metal hardness, metallographic structure, tensile strength, etc.
Audited Supplier 
){kind=link}